Results 1 to 8 of 8
Threaded View
-
02-08-2018, 08:24 AM #6
- Join Date
- Feb 2018
- Posts
- 11
i'm using cura 3.1. i checked in my printer menu and there is an option under Prepare>Move>.01 or .1 or 10mm> z-axis. while it looks like that may add offset to the nozzle, seems like doing it in code is the better option.
i believe in cura, i just need to add the z offset in the code editor in the section under start settings.
EDIT: so in cura 3.1, there is an initial layer height option set to .2mm double my regular layer height .1mmLast edited by grue; 02-08-2018 at 08:51 AM.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials