Results 1 to 1 of 1
Thread: wrong temperatur
-
05-05-2022, 08:23 AM #1
- Join Date
- May 2022
- Posts
- 1
wrong temperatur
hi, I completely recreated my configuration.h file. (marlin 02000903) now a temperature of 75 degrees is displayed on both sensors. when I load the old firmware, it's 22 degrees again, which is normal. my other printer shows it too. I forgot something somewhere or set it wrong. I don't know where now.
I have already executed and saved the m149 c command. no change. where else can you influence the temperature?
I have set the same temp_sensor in both versions.
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_4 0
#define TEMP_SENSOR_5 0
#define TEMP_SENSOR_6 0
#define TEMP_SENSOR_7 0
#define TEMP_SENSOR_BED 1
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery