Results 1 to 10 of 18
Thread: Printing with PETG
Hybrid View
-
10-27-2017, 08:33 AM #1
actually the thicker the layer, the greater chance of it being watertight. Fewer layers = fewer chances for holes.
Print fairly slowly, no infill (important) and 0.3-0.4 layer thickness.
I have managed to print water tight pet-g vases, so it is doable :-)
With pet-g you want the lower end of the printing range for better layer bonding.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help