Results 1 to 7 of 7
Thread: First X One V2 problem
Threaded View
-
08-26-2017, 10:03 AM #4
- Join Date
- Aug 2017
- Posts
- 95
OK, most likely the limit switch cable. The problem goes away when the print head is mid range y-axis that relieves the bend in the x-axis cables. I ordered a couple new ones but at least I can still print if I start out with the print head mid range y-axis. If it is towards the front of the cabinet in y-axis I get the problem and it basically locks up when it tests the right x-axis limit. Parts are cheap, and it doesn't look like too much trouble to replace. Hope that is the issue.
This video demonstrates:
https://youtu.be/l7wyItu6Xo8
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials