Results 1 to 6 of 6
Threaded View
-
09-02-2017, 11:16 PM #4
- Join Date
- Aug 2017
- Posts
- 5
Well, I finally got around to printing another one. Temp at 230c, 45mm/s speed, and 0.2mm layer height. I leveled my bed to my new preferred height and it looks nearly identical to the original one with blistering about 1/4 as bad (but only on the bottom half). Next time I print it, I'll turn on the fan and see what happens. Thanks for the tips!
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials