Painters tape not sticking kapton tape? tape discussion

[curious aardvark]

ah that video makes me all nostalgic for the days I had to fight the prints. Don't know how you guys can keep on doing it ;-)

[Roberts_Clif]

ah that video makes me all nostalgic for the days I had to fight the prints. Don't know how you guys can keep on doing it ;-)

Actually that print was way too close to the bed, I was showing how secure you could get your prints on Vinyl Transfer Paper.
When adjusted up a little higher the prints come off with a couple light taps, and a little bit higher again you can slide the putty knife right under the print without damage to the paper.
After 3 or 4 prints in the same location you may need to buff with a 1500G sand paper to get good adhesion again.

I tested the Vinyl transfer paper it too stuck much better if applied when warm.