Results 1 to 10 of 26
Thread: intermittent overextrusion
Hybrid View
-
07-24-2017, 10:26 AM #1
- Join Date
- Jul 2017
- Posts
- 42
printed ignoring thin wall infill. Looked best yet, still some rippling at the bottom but it didn't print another perimeter inside now matter how high I put the overlap. It's a part that is 1.5mm thick and a .4mm line width, should easily be able to fit a third in there but I guess it won't do it unless it can complete a full rotation or something.
So I went back and put the gap fill in and lowered that gap fill overlap to 5%.
We shall see
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help