Auto_Bed_Leveling: Enhanced G29 command

[brainscan]

You're an absolute genius!!!!!!!!!!!!!!!
>>>G28
SENDING:G28
??? Going to zero Z-Axis with offset of: -7.400000
Debug-1: Z-Axis current location: 20.000000
Debug-2: Z-Axis current location: 0.000000
Debug-3: Z-Axis current location: 0.000000
Debug-4: Z-Axis current location: 0.000000
Debug-5: checking if we can delete Z specific homing code.
Debug-8: Z-Axis current location: 0.000000
Debug-9: Z-Axis current location: 7.400000
Debug-10: Z-Axis current location: 7.400000
>>>M114
SENDING:M114
X:84.00 Y:97.00 Z:7.40 E:0.00 Count X: 84.00 Y:97.00 Z:7.40

In my excitement though I forgot to raise the head again before G29 and had to quickly hit the reset button. I think i'll add the z raise before back in and try again. I'll post the results but I think you've cracked it. Not sure when I last reset the EEPROM so I would never have thought to try that. Thank you thank you thank you, you're honestly a legend!!!

***Thank you so much, everything seems to be working. I just sent a G1 Z0.2 and it went down to what looks like 0.2, yes!!!! Gave it a few x and y moves and it tracks the bed exactly as it should.

>>>G28
SENDING:G28
??? Going to zero Z-Axis with offset of: -7.400000
Debug-1: Z-Axis current location: 0.000000
Debug-2: Z-Axis current location: 0.000000
Debug-3: Z-Axis current location: 0.000000
Debug-4: Z-Axis current location: 0.000000
Debug-5: checking if we can delete Z specific homing code.
Debug-8: Z-Axis current location: 0.000000
Debug-9: Z-Axis current location: 7.400000
Debug-10: Z-Axis current location: 7.400000
>>>G29 n5 T V4
SENDING:G29 n5 T V4
Roxy's Enhanced G29 Auto_Bed_Leveling Code V1.01:
Bed x: 15.00 y: 10.00 z: 7.48
Bed x: 56.00 y: 10.00 z: 7.51
Bed x: 97.00 y: 10.00 z: 7.51
Bed x: 138.00 y: 10.00 z: 7.49
Bed x: 179.00 y: 10.00 z: 7.45
Bed x: 15.00 y: 55.00 z: 7.38
Bed x: 56.00 y: 55.00 z: 7.42
Bed x: 97.00 y: 55.00 z: 7.44
Bed x: 138.00 y: 55.00 z: 7.46
Bed x: 179.00 y: 55.00 z: 7.45
Bed x: 15.00 y: 100.00 z: 7.35
Bed x: 56.00 y: 100.00 z: 7.39
Bed x: 97.00 y: 100.00 z: 7.42
Bed x: 138.00 y: 100.00 z: 7.44
Bed x: 179.00 y: 100.00 z: 7.44
Bed x: 15.00 y: 145.00 z: 7.35
Bed x: 56.00 y: 145.00 z: 7.38
Bed x: 97.00 y: 145.00 z: 7.40
Bed x: 138.00 y: 145.00 z: 7.42
Bed x: 179.00 y: 145.00 z: 7.40
Bed x: 15.00 y: 190.00 z: 7.43
Bed x: 56.00 y: 190.00 z: 7.45
Bed x: 97.00 y: 190.00 z: 7.44
Bed x: 138.00 y: 190.00 z: 7.40
Bed x: 179.00 y: 190.00 z: 7.30
Eqn coefficients: a: 0.00 b: -0.00 d: 7.46
Mean of sampled points: 7.423578


Bed Height Topography:
+0.00884 +0.02212 +0.01627 --0.02280 --0.11889
--0.07163 --0.04233 --0.02084 --0.00444 --0.02553
--0.07670 --0.03139 --0.00405 +0.01744 +0.01900
--0.04506 --0.00834 +0.01431 +0.03228 +0.02447
+0.05455 +0.08853 +0.08345 +0.06275 +0.02798


planeNormal x: -0.00 y: 0.00 z: 1.00


Bed Level Correction Matrix:
1.000000 0.000000 0.000083
0.000000 1.000000 -0.000447
-0.000083 0.000447 1.000000
echo:endstops hit: Z:7.31