Results 1 to 10 of 757
Threaded View
-
07-26-2014, 05:54 PM #10
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
If you scroll down a bit, you'll see I have the EEPROM turned off as well, but I'll put in those M codes when the current print is finished. Yes, I've added the Enhanced code to the firmware already. Edit: I just did the M502 followed by M500, then homed all axes. Y axis still moves during Z lift. I feel I should note the Y axis doesn't move with every Z movement, only during the "Z lift before homing".
Last edited by Roxy; 07-26-2014 at 09:22 PM.
Please explain to me how to...
Yesterday, 10:55 PM in 3D Printer Parts, Filament & Materials