Originally Posted by
Roxy
And you still have these lines in the Configuration.h file?
#define Z_RAISE_BEFORE_HOMING 0 // (in mm) Raise Z before homing (G28) for Probe Clearance.
#define Z_RAISE_BEFORE_PROBING 0 //How much the extruder will be raised before traveling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 0 //How much the extruder will be raised when traveling from between next probing points
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials