Results 1 to 10 of 757
Threaded View
-
08-16-2014, 03:15 PM #11
- Join Date
- Aug 2014
- Posts
- 627
I spotted this issue after I installed his code so I fell back to the original code and it did the exact same thing. Something funky in the G29 coding, that I can't find, and that is not in the G28 or the G30. I went looking to see if could spot something that was possibly left out of G29 from 28 and 30 but no go.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion