Results 1 to 10 of 20
Hybrid View
-
07-20-2017, 06:35 AM #1
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Here is what I got and use for all of my printers. From Amazon. They work fine for me right out of the package.
SanDisk 8GB Class 4 SDHC Flash Memory Card - 2 Pack SDSDB2L-008G-B35
Also you might blow out your card slot a little for dust etc. As far as for formatiing this is what is recommended.
https://www.sdcard.org/downloads/formatter_4/
Just remember, as you know already, these readers in the printers are fussy (cheap). A lot of times I get a read error and I just go backwards on the menu and try again.Last edited by wirlybird; 07-20-2017 at 08:05 AM.
-
07-20-2017, 11:14 AM #2
- Join Date
- Apr 2017
- Posts
- 36
Wirlybird, thanks for that. I'd like to try to format it without installing a new piece of software just for that purpose, but I will keep that program in mind if I have problems.
Unfortunately, when I get these card read errors, I can't go back into the menu - I get nothing, not even the plate leveling routine. It just doesn't work.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials