Results 1 to 9 of 9
Thread: plastic won't stay put!
Threaded View
-
04-29-2014, 11:30 AM #1
- Join Date
- Apr 2014
- Posts
- 3
plastic won't stay put!
Here is a photo of what is happening with my printer. It is printing a few concentric squares, which are great other than the fact that one edge got sort of lifted off the kapton tape and dragged around a bit. I have the heat on the bed at 72C, and some people are telling me "you don't need to heat the bed with PLA!" is that true?
Extruder is 190.
IMG_0381.jpg
Code:; layer_height = 0.3 ; perimeters = 3 ; top_solid_layers = 3 ; bottom_solid_layers = 3 ; fill_density = 0.4 ; perimeter_speed = 20 ; infill_speed = 60 ; travel_speed = 130 ; nozzle_diameter = 0.4 ; filament_diameter = 1.72 ; extrusion_multiplier = 1 ; perimeters extrusion width = 0.42mm ; infill extrusion width = 0.42mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.60mm
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials