Results 1 to 10 of 11
Thread: Bed leveling UBL delta printer
Hybrid View
-
06-24-2017, 03:31 PM #1
One thing you can do is change your Z_MAX height by 10 mm... Do a M502 & M500... And see if G26 is 10mm above the bed... If it is not... It maybe you have that number set wrong. G26 just positions the nozzle 1 layer above the bed. And if it is not doing that, the machine is confused about where the 0.000 location is.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help