Results 1 to 10 of 17
Hybrid View
-
06-20-2017, 04:15 PM #1
- Join Date
- Jun 2017
- Posts
- 9
-
06-20-2017, 04:25 PM #2
- Join Date
- Jun 2017
- Posts
- 38
One last thing, what is your filament size in your slicer set to?
-
06-20-2017, 06:06 PM #3
- Join Date
- Jun 2017
- Posts
- 9
so what if I drilled a opening into the top of the hotend - and inserted a piece of thought on top say 1/2" high will that stop it ya think?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion