Results 1 to 3 of 3
Hybrid View
-
06-13-2017, 01:14 PM #1
It's the extruder slipping.
Basically you're either trying to print too fast or too cool.
It can't push the filament through the extruder fast enough and it clicks.
It's the extruder slipping.
Basically you're either trying to print too fast or too cool.
It can't push the filament through the extruder fast enough and it clicks.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion