Results 1 to 10 of 22
Hybrid View
-
06-12-2017, 03:01 PM #1
- Join Date
- Jan 2016
- Posts
- 326
Anything can go wrong if you don't watch the 3D printer for a few minutes after it starts printing. The paper may move while printing.
-
06-12-2017, 11:04 PM #2
- Join Date
- Dec 2016
- Posts
- 13
Been using this for more than 75 prints. About 10 or so had a problem of the paper shifting. That was prior to installing the rubber on the bottom of the table on the trap door clamping surface. that improved things significantly.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials