Results 1 to 10 of 12
Thread: Kapton Oops!
Threaded View
-
05-29-2017, 11:04 AM #4
pva glue stick seems to work really well for most things - bear in mind it will probably stick a lot firmer than with the kapton tape. So you shouldn't need as much downward pressure (squidging) on the first layer.
I don't mean stick the kapton film with the glue stick - I mean just use the glue stick by itself as the printing-on surface. Not sure if that was clear, lol
Please explain to me how to...
Yesterday, 10:55 PM in 3D Printer Parts, Filament & Materials