Results 1 to 5 of 5
Threaded View
-
05-12-2017, 01:48 AM #3
- Join Date
- May 2017
- Location
- Israel
- Posts
- 2
It's very odd, as the problem is consistent. tried with two slicers - Cura and Slic3r.
The printer is Geeetech i3 pro C dual extruder.
There are no tubes in this one...
thanks for the help!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion