Heaven help me - I've just bought a delta kit :-)

[curious aardvark]

right got pronterface, attached usb.
And by george it works !
So far I've just been playing with moving the head around.

heated the bed - that works.
Hmm, extruder doesn't work.
But hey, the rest is good :-)

Had thought - maybe extruder won't feed till it's heated up.
That seems to be working - heats up super fast too.

Yep that was it - everything working :-)

Had a play. Did extrude some plastic, but not much.
Think it's having problems pushing it through the tube.
Probably have to move the extruder and shorten the tube again.
Figure I can mount the filament on the neighbouring strut and bring it across and up slightly.
Might also switch to the 0.5mm nozzle.

But all in all - everything works. Just need the tweaking and furtling to get it where I want it.
Had simplify 3d moving the head around. Wouldn't do a phantom print, but that's most likely a gcode issue.
Need to update the s3d on this computer and load it in as a new printer.

Overall I have to give it two thumbs up :-)