Results 1 to 10 of 27
Hybrid View
-
04-22-2014, 07:32 PM #1
- Join Date
- Apr 2014
- Posts
- 1
Just in case anyone wants to build a 3D printer that size (or anything larger than normal), Andrey is using these 4 amp, 50 volt open source stepper drivers:
http://www.ecomorder.com/techref/ecomprice.asp?p=416074
Which work with the standard RAMPs/Marlin or other 3D printer controllers.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion