370mm X 250mm X 300mm

[Marm]

I'll follow this thread . Sounds like too good of deal, don't go spending too much before it gets there.

[AutoWiz]

I'll follow this thread . Sounds like too good of deal, don't go spending too much before it gets there.

Ya i'm gonna wait on the 0.9 degree stepper motors and .2mm nozzle. The resolution jump will come a little down the road. like in a few weeks or so.

[AutoWiz]

The filament holder finished printing..





I am absolutely glowing over the quality of these prints. I worked so hard to create the machine churning out these parts. From scratch. I have detailed it's building and evolution here:
http://www.digitalcorvettes.com/foru...d.php?t=270130
and here:
http://3dprintboard.com/showthread.p...Mixing-Printer
I am just so happy with what I ended up with.

I understand this machine comes without any feet on it. So I found this on thingiverse:
http://www.thingiverse.com/thing:1732461/#files
It is a base stabilizer but it will serve as feet and will pick the aluminum structure up off the table. I have already started printing the first piece of 5..