Results 1 to 10 of 354
Thread: 370mm X 250mm X 300mm
Threaded View
-
07-28-2021, 06:13 PM #11
- Join Date
- Apr 2021
- Posts
- 186
Z-auto align is a very nice feature. It works very well with UBL too.
Another thing in Marlin you might like is the ability to speed things up a little bit (change filament, print, etc) by setting the temp hysteresis and window.
#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109
#define TEMP_WINDOW 5 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target
The above means that rather than the printer settling on 215, following a M109 S215, it will start the next command at 210. As usually the next command is a change filament, or a prime line, the temperature can handle being a bit wonky at the start. By the time the print itself begins, the temperature will be stable.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help