Results 1 to 10 of 354
Thread: 370mm X 250mm X 300mm
Hybrid View
-
10-30-2019, 09:20 PM #1
So my bed is going to move more now that it is turned sideways. 400mm travel instead of 250mm. And with the MMU2S unit hanging off the gantry it is clear that the ptfe tubes will have to make sharp bends to avoid the bed at the start of prints. So I am thinking about making a bracket and hanging the MMU2S off the gantry still but just at 90 degrees so the PTFE tubes are off to the side..
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help