Results 1 to 5 of 5
Thread: heater pin numbers
Hybrid View
-
01-28-2017, 02:29 PM #1
Not sure what you have for hardware or firmware, but I believe the typical Marlin/RAMPS config is as follows:
HEATER_BED_PIN 8
HEATER_1_PIN 9
HEATER_0_PIN 10
It can be tricky to work through the #if #else #endif logic. Always check to make sure no more than one definition is assigned to any pin for your specified motherboard type.
-
01-28-2017, 02:36 PM #2
- Join Date
- Aug 2015
- Posts
- 17
it is a rambo 1.2b board with marlin firmware. Forgot to include that in there.
-
01-28-2017, 05:50 PM #3
-
01-28-2017, 06:17 PM #4
- Join Date
- Aug 2015
- Posts
- 17
ahh pin 9 did the trick. Thanks
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials