Results 1 to 10 of 29
Hybrid View
-
01-28-2017, 01:29 PM #1
Ya an all metal setup can flow more plastic, bigger/longer melt zone. More direct heat to the nozzle since no PTFE to insulate. I run my multiplier at about .86.
Ya an all metal setup can flow more plastic, bigger/longer melt zone. More direct heat to the nozzle since no PTFE to insulate. I run my multiplier at about .86.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials