Results 1 to 4 of 4
Thread: Stuck filament
Threaded View
-
01-29-2017, 10:34 AM #3
- Join Date
- Apr 2016
- Posts
- 120
The whole assembly can be taken apart quite easily.
Remove the allen keys holding the fan in place, remove the cable connector from the top of the stepper motor and gently pull the motor from the back of the block.
The extruder will then be able to be pulled out and you can even disassemble this if required.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials