Results 1 to 2 of 2
Threaded View
-
01-21-2017, 05:24 PM #1
- Join Date
- Jan 2017
- Posts
- 1
Not exactly a problem, but I need practice
I'm new to the whole printing scene, but I took a class that was mostly centered around 3D modeling in Autodesk Inventor last year, so I have some experience with that.
However, I'm a little out of practice since that was nearly a year and a half ago. Therefore, I need some practice to get back into the groove, before I start 3D printing. (I ordered a printer today, it'll be here in two days. If anyone wants the link I can give it.)
So, I'd really like some ideas of things to model which won't be terribly difficult but will help me regain some skills of modeling, so I can fully use my 3D printer.
The software I'll be using for a while is Autodesk Fusion 360 for most modeling, 123D Design for some things, and Cura 2.3.1 for slicing.
Thanks in advance to anyone/everyone who helps and comments. I really appreciate it.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials