Results 1 to 10 of 22
Threaded View
-
03-13-2017, 07:59 AM #10
- Join Date
- Jan 2016
- Posts
- 41
Ok i will raise the temperatur a little bit more and try again....
The enstopper will not work because some powder or polymere get into the endstop and work like an isolator.
Do you see a little white film outside you printer? These ploymere in compination with the powder come into the endstopp.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials