new problem with print quality....help!

[printbus]

the image upload feature isnt working.........

Make sure the images you're trying to upload are less than say 800x600 pixels. Like many forums, 3dprintboard has constraints on what you can upload.

BTW: Without seeing the photos, my initial guess is a bit high in printing temperature and/or you're seeing a need to provide print cooling airflow. But I'm not familiar with taulman g-tech.

[ProtoFox]

okaythanx, ive attached images here........ive altered the temps up and down to no effect. the only thing that seems to help is speed, but ive never had an issue printing this filament at 50-60mm/s. now im forced to print at 20-30mm/s just to fix this.......