Results 1 to 6 of 6
Hybrid View
-
01-09-2017, 02:25 AM #1
- Join Date
- Oct 2013
- Location
- Honolulu, HI
- Posts
- 199
Try putting it in the freezer for a bit. My PETG prints pop right off after it gets cold. I use purple gluestick on the glass. It might make it a bit easier to come off.
-
01-09-2017, 01:50 PM #2
- Join Date
- Apr 2015
- Location
- Northern Ohio
- Posts
- 198
Yes you are not letting it cool long enough. You can also adjust the first layer height a bit to keep from driving the plastic into the bed so hard. The freezer trick works well also. I use it quite a bit with ABS.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials