Subscribe to Our Newsletter Advertise
Close



Results 1 to 7 of 7

Hybrid View

  1. 01-10-2017, 09:46 AM #1
    pochrist
    pochrist is offline
    Student
    Join Date
    Dec 2016
    Posts
    43
    Quote Originally Posted by BLKKROW View Post
    I have the part cooling fan controlled by the RAMPS board. It turns on and changing speed depending on what it is printing, such as bridges, overhangs, etc.
    Is there any documentation anywhere that can point me as to where I would connect the fan to Ramps board, does it use a 3 or 4 pin connector, etc. Thanks
    Reply With Quote Reply With Quote
  2. 01-10-2017, 10:40 AM #2
    BLKKROW
    BLKKROW is offline
    Engineer-in-Training
    Join Date
    Jul 2014
    Posts
    305
    Quote Originally Posted by pochrist View Post
    Is there any documentation anywhere that can point me as to where I would connect the fan to Ramps board, does it use a 3 or 4 pin connector, etc. Thanks
    I found the information through a Google search but there is no documentation. What you need is a 12V fan and connect it to D9 on Ramps.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules