Dreamer SD card issues

[roykirk]

Update: Well, 24 hours of owning the Dreamer and can't get it to do a thing. Maybe I should have just bought another Creator. Checked to ensure the SD card is formatted in FAT properly. All files on it are .x3g. Dreamer shows there are files on the card from the main menu but when I go to print from the card I just get the same blank menu as shown in the previous photo. Tried a different SD card, same issue. Even tried to connect and print via USB but Flash Print also says "connection failed." So far I have a very expensive box with pretty lights.

*Problem Solved*...sort of

I found that my dreamer will only recognize .gcode files instead of the standard .x3g that the Creator uses. Weird. Also weird that when I try to start a print it tries to start doing it immediately without proper preheating. I'm not liking this Dreamer one bit so far. I think it might be going back to Amazon in exchange for another Creator.

[roykirk]

Issue completely solved now. I've already initiated a return on this piece of junk. Wifi won't transmit, SD card won't work 80% of the time, and when it does it tries to start printing immediately without preheating. And conveniently manual preheating doesn't work as only the left extruder will heat. As a final benefit, carriage slams in to limits and grinds despite running the proper homing sequence several times. Creator Pro has been ordered and will be here Tuesday.