Results 1 to 10 of 12
Threaded View
-
01-03-2017, 10:55 AM #6
- Join Date
- Aug 2015
- Posts
- 241
David system is maybe a little better then the Einscan-Pro but is a lot of work to setup properly,
The Scanify is not really accurate, and stitching scans is based on a subscription setup, more stitching, more pay
But don't just look for a scanner. the software is even more important to get good accurate and closed scans, manually adjusting scans to fit is a long and tedious job that still could not guarantee good results.
that's why I chose the Einscan, the software stitching is fats and very easy.
Be careful about choosing a scanner, you need at least 0.1mm or smaller accuracy to get the detail you want for motor parts,
some manufactures don't really mention the accuracy or use fancy words to describe blobsLast edited by This; 01-03-2017 at 11:03 AM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials