Results 1 to 2 of 2
Hybrid View
-
12-29-2016, 09:23 PM #1
- Join Date
- Jul 2014
- Posts
- 305
I have a 12" Pegasus with direct drive and I print TPU with no retraction and I slow the print speed to 25% of its normal speed. It prints stringy, so you can slowly increase the retraction until it doesn't work and find your printers threshold. I used these settings and have had 0 wasted prints.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials