Looking at Pegasus 12

[augerpro]

The polycarbonate was referring to the sheets to enclose the printer, probably from Home Depot since the deluxe upgrade kit is currently unavailable.

Any particular hairspray?

Your LED is close to the tip? Interesting.

[uncle_bob]

The polycarbonate was referring to the sheets to enclose the printer, probably from Home Depot since the deluxe upgrade kit is currently unavailable.

Any particular hairspray?

Your LED is close to the tip? Interesting.

Hi

Forget about Lowes for an enclosure. There are places on the internet that will do custom cutting for you with much better material. If you go the Lowes route, make the enclosure out of plywood.

The LED light I used is a fairly normal 12V "outdoor light". It's a 10W unit from Amazon. Nothing special about it.

Bob