Results 1 to 10 of 84
Thread: Looking at Pegasus 12
Hybrid View
-
01-17-2017, 08:34 PM #1
- Join Date
- Feb 2015
- Posts
- 371
What did you have to print in order for this to work?
I was looking at these and thought they would be a good fit.
https://www.amazon.com/OpenBuilds-An...MZSX0SBA5AS881
Also, how did you decide on the 8mm ACME rod instead of a M6 or similar? Like this one...
https://www.amazon.com/dp/B00I5V4RVO...I3IK93R4AR8RBF
-
01-17-2017, 09:30 PM #2
- Join Date
- Jul 2014
- Posts
- 305
I had to print the mount for the 8mm nut here is an example: ttp://imgur.com/a/WjSmz . I also printed a mount for a ball bearing to support the top of Acme Threaded rod.
I chose the 8mm Acme Threaded rod due to its common use in 3D printing. Using this and the A4988 driver I also get a nice 400 steps per mm.
-
01-18-2017, 09:38 AM #3
- Join Date
- Feb 2015
- Posts
- 371
Anything special or specific about the collar on the bottom?
Do you have links to the files you printed?
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials