Results 1 to 6 of 6
Threaded View
-
12-11-2016, 09:18 AM #3
- Join Date
- Dec 2016
- Posts
- 43
Thanks for the response however I think I must be missing something you mention:
"Printing at 0,0 often is a result of having "center at 0,0" checked."
I can find no check boxes anywhere in the slice bed settings just input boxes which I filled out like this:
Capture.JPG
as you can see according to settings I can find should move the print head to center of the bed (this works perfectly fine 0.9.9)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion