Results 1 to 10 of 68
Hybrid View
-
05-07-2014, 11:20 AM #1
- Join Date
- Apr 2014
- Posts
- 5
I'll give it a try. I'm just using a cheap kw12 switch and a hitec HS65HB servo. This is my first printer (prusa i3 rework), so i'm still dialing it in and getting a feel for it. The bed is con-vexed in the center once it warms up. I was getting pretty inconsistent prints. Once I enabled auto bed leveling and used 25 probe points, everything magically started printing good.
I like your code, it'll at least give me a baseline to work off of to see if the switch might be failing.
-
05-07-2014, 12:00 PM #2
A lot of people want to use a 3x3 grid. Probably because in the Configuration.h file it says there shouldn't be a need to go higher than that. But I know 4x4 works much better than 3x3 and 5x5 works a little bit better than 4x4.
How do you know there is a high spot in the center of your bed? (I'm guessing that is what you meant by 'convexed') Did you see that with the T option on the G29 with a 5x5 grid?
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials