Please Help - Senior Moment Strikes

[uncle_bob]

Hi

Having spent the last 8 hours looking at just how "interesting" the output of he BLTouch is at the moment ... they can't make it any worse. I'm struggling to get it below 0.1 mm on spread over 50 repeats. Repeatability that is at >1/2 my normal layer height simply isn't going to cut it. With std deviations at 0.04, simply getting to 0.1 spread is unlikely .... If the 0.005 one sigma in their ads is correct, I'm doing something very wrong.

Trying to dig out just how to turn off the "alarm" on the BL from inside Marlin right now ... so much fun

Bob