SHINING 3D unveils new and updated EinScan 2.0

[propologist]

Were is this in the program? "There's also an option to set the number of turntables steps (or rotations) from 8 to 180 if you need to capture more angles." Is this only in the pro vers.? If it is in the S- vers. please let me know where.
Thanks

[scobo]

The new version is for both the Pro and the S. It's the S I'm using.
The steps option is in the main scanning screen right above the "Fast Mesh" button.
You can type the required number of steps in the box to the right of "Turntable steps (8-180)".

[This]

And a "review" of the Einscan-s running with the new software,
I would not call this a good review, he just got the scanner sent to him without him knowing how it works, and not taking the time beforehand to do some research about 3D scanning,
he is just pressing buttons, complaining about the software being non intuitive, and surprised at the bad quality it produces.

[scobo]

And a "review" of the Einscan-s running with the new software,
I would not call this a good review, he just got the scanner sent to him without him knowing how it works, and not taking the time beforehand to do some research about 3D scanning,
he is just pressing buttons, complaining about the software being non intuitive, and surprised at the bad quality it produces.

I would agree although to be fair, he did say right at that start this is his first attempt at scanning and he didn't know what he was doing.

[This]

I would agree although to be fair, he did say right at that start this is his first attempt at scanning and he didn't know what he was doing.

I just don't understand why he made this video, just to get clicks I guess,
He could have started without any knowledge, and made the second half of the vid about explaining what he did wrong and make some better scans !
Maybe he just wanted to show that just sending a free 3D scanner does not get you a good review, and to me it looks like he fumbled a bit on purpose.