Close



Results 1 to 3 of 3
  1. #1

    Turnigy fabrikator bed cools down when printing

    Hi,
    I have a turnigy fabrikator. Everything works but after about 5 mins of printing the bed cools down from 100C to 82C. My extruder can only print abs so I am in a bit of a tight spot. any way I could stop that or print abs at that bed temperature?

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,072
    umm, if your extruder can print abs then it can also print: pla, pet-g, any pla based filament and just about every other kind of filament out there.

    Who told you it will only print abs ??
    All the adverts I've just looked at state abs and pla.

  3. #3
    I believe I have the Metal J-head V6 Hotend but when I try to print in pla it expands in the extruder and clogs. I have tried lower the temperature and adding a fan but it doesn't work.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •