Results 1 to 10 of 10
Hybrid View
-
06-21-2017, 11:34 AM #1
- Join Date
- Mar 2015
- Location
- GREECE
- Posts
- 18
...AND YES... I AM BACK AGAIN...
The GERMAN REPRAP, is still NOT functioning...
Well after a very short break of NOT working... GERMAN REPRAP CRAP actually , managed to make it print 2 parts... The one was the ready part of the SD card if memory serves right and the other was one of my parts...
I can say to be honest the quality was acceptable BUT on the other hand I have changed and upgrade almost everything...
ANYWAY THE GERMAN REPRAP CRAP IS REFUSING TO WORK..
Actually the Z- axis is not moving when in gcode... Everything works the X-axis , Y-axis , E-axis but the Z-axis is not moving at all just a very rough noise from NEMA motor... BUT WHEN IN REPETIER MANUAL MODE... The Z- axis works perfectly...
I have to change the .ino file with my own settings...
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help