Results 1 to 8 of 8
Threaded View
-
11-22-2016, 05:33 PM #5
What are these values in your Configuration.h file?
#define min_software_endstops false //true // If true, axis won't move to coordinates less than HOME_POS.
#define max_software_endstops false //true // If true, axis won't move to coordinates greater than the defined lengths below.
If you set them to false... It is very possible your Z probe comes alive.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help