Results 1 to 10 of 17
Thread: Sticks too well
Hybrid View
-
11-17-2016, 12:12 PM #1
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
On the X-ONE if still using the blue sheet on the bed. Try increasing your first layer height. PETG doesn't like a squish and the blue sheet is like super glue!. I can run 120% first layer with PLA on that stuff and get good adhesion.
Glass is a good choice but the X-ONE doesn't have any "conventional" way to hold the glass. I have some printed clips that work pretty good. I am also getting ready to try another method and see how it goes.
Another thing people do when using PETG on PEI bed is talcum powder or glue stick. Do a google search on these to get info.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion