Even if they produce great prints you need to make sure the Build Area is sufficient for you particular needs. It seems to have a two-stage build area. I think that in order for the extruder to clear the frame, it has to move in to a a 3.5" base. So at full base size of 4.4"x4.3" you can print 2.9" high. If the base is less than 3.6" or steps in, you can print up to 4.6" or 116mm. From what I see most RepRap printers are capable of about twice that Build Size. But, it you only do small stuff, it looks simple, clean and well designed. Their thermochromic filament looks fun.