Results 1 to 10 of 50
Thread: Another Sintratec kit built
Threaded View
-
11-04-2016, 01:54 AM #11
- Join Date
- Jan 2016
- Posts
- 41
Your are right.
On the other side most connection are safe. The nut prefents loosing. Following positions have the problems from my sight of view:
1. Laserblock (very bad if you are cleanig the printer)
2. the sliding mechanism of the print and power chamber. The use special nuts but the conter nut gets loosen
3. the shelf of the printer ... not a real problem
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help