Results 1 to 10 of 50
Thread: Another Sintratec kit built
Threaded View
-
11-06-2016, 03:55 PM #11
- Join Date
- Nov 2016
- Location
- Lancashire, UK
- Posts
- 36
Hi rudschul, I am absolutely sure there is not a problem with the main electronics board as I have wired both the X and Y galvos from both outputs from the main board and both work fine when put through the X galvo driver but neither of them work when put through the Y axis driver. Also, both power supply lines work okay so that only leaves the Y axis driver as the culprit.
We will see what happens tomorrow, if I get a quick response.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials