Results 1 to 6 of 6
Hybrid View
-
01-18-2017, 04:05 PM #1
- Join Date
- Oct 2016
- Posts
- 19
No, i didnt fix it, I just tweak the bed height so the print starts at the right place. However, it settled to be much closer than the 2-3mm i originally had, so there was probably some user error. Check your slicer settings -> print settings -> general -> z offset. IIRC the z offset moved the print head down, so if this is already 0 try making it 0.3.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials