Results 1 to 10 of 17
Threaded View
-
11-01-2016, 10:18 AM #9
- Join Date
- May 2014
- Posts
- 14
I have a fan on this... it's the Geeetech Prusa I3 Pro C, with the dual extruders. It has a single fan on the front of the print head, but the back side is the only one with no 'ripple'. The front/back orientation, by the way, has no bearing on the underhang artefacts.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help